FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
NOTE:
Editing your existing login password is different than resetting your login
password. Click Edit Password in the System Configuration page to edit your login
password to be any value that meets the system password requirements. For more
information, see "Modifying the System Password" on page 36. Click Reset
Password in the Login page to reset your login password to the system default
value, which requires you to provide the service tag for your system. For more
information, see "Resetting the Default System Password" on page 37.
•
Shutdown—use this option to shut down the DR4000 system.
CAUTION:
Shutdown powers Off the appliance on which the system software is
installed. Once in a powered Off state, you can power it On at its physical location
or using an iDRAC configuration to the system.
•
Reboot—use this option to reboot the DR4000 system.
About the Support Page and Options
In the Support page, you can view the current support information for your
system. The Support page displays the following current Support Information
categories:
•
Software Version
•
Service Tag
•
Last Diagnostic Run
•
BIOS Version
•
MAC Address
•
eth0 MAC and Speed
•
eth1 MAC and Speed
•
eth2 MAC and Speed
•
eth3 MAC and Speed
Understanding the Support Page Options
The Support page contains two important options that display separate pages
for generating, downloading, or deleting diagnostics log files and upgrading
the DR4000 system software version:
•
Diagnostics
•
Software Upgrade
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
Setting Up the DR4000 System
29