Resetting The Default System Password; Shutting Down The Dr4000 System - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-

Resetting the Default System Password

To reset the system to use the default password (St0r@ge!)for logging in:
1 In the Login window, click Reset Password.
The Reset Password dialog is displayed.
2 In Service Tag, type the service tag associated with your system, and click
Reset Password.
NOTE:
If you are unsure of the service tag associated with your DR4000
system, it can be found on the Support page (click Support in the navigation
panel to display the Support Information pane, and the service tag is the
second item displayed in the Support Information pane).
The Login window is displayed, and a Password has been reset dialog is
displayed.
3 To login using the default password, type St0r@ge! and click Login.
NOTE:
After resetting the login password to its default and logged in to the
DR4000 system, It is recommended for security reasons that you create a new
unique login password.

Shutting Down the DR4000 System

If needed, you can shut down the system by selecting Shutdown in the
System Configuration page. However, you should fully understand what this
means to system operations before any attempt is made to shut down the
system.
CAUTION:
Shutdown powers Off the appliance on which the DR4000 system
software is installed. Once powered Off, you can power it On at its physical
location or use an iDRAC connection to the DR4000 system.
To shutdown your DR4000 system:
1 In the navigation panel, select System Configuration.
The System Configuration page is displayed.
2 Click Shutdown on the System Configuration page options bar.
The Shutdown confirmation dialog is displayed.
3 Click Shutdown System to proceed with shutting down the system.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
Configuring the DR4000 System Settings
37