Dell DR4000 Administrator's Manual page 100

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
Table 8-1. DR4000 System Alert Messages
Alert Message
System Chassis Alerts
Network Interface Controller is
missing.
Network Interface Controller
name
< > is disconnected.
Network Interface Controller
name
< > is disabled.
Network Interface Controller
name
< > driver is bad.
name
CPU < > failed.
CPU <name> is missing.
name
DIMM < > failed.
name
DIMM < > is missing.
Temperature probe <
failed.
name
Voltage probe <
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
92
Troubleshooting and Maintenance
Description/Meaning or Action
• Remove and reinsert the NIC.
• If this does not resolve the problem, replace the
NIC.
• Connect it to a network and/or check your
network switches or routers for any network
connectivity issues.
• Enable the port on the NIC.
• Upgrade the DR4000 system appliance (in the
Software Upgrade page, click Start Upgrade).
• Replace the failed processor.
• Reinsert or replace the missing processor.
• Replace the failed memory device (Dual In-line
Memory Module).
• Re-insert or replace the memory device.
• The memory capacity of the storage appliance
is below the minimum required for correct
operation.
• The storage appliance requires service.
name
> • The storage appliance requires service.
> failed. Perform the following:
• The storage appliance requires service.