Displaying Statistics - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
2 Click Select to identify the replication relationship on which you want to
set the replication bandwidth speed rate, and click Bandwidth.
The Set Replication Bandwidth Throttling dialog is displayed.
3 Select the IP address for the peer system from the Peer System drop-down
list.
4 In Select speed rate type or use default (bandwidth unlimited), choose
the replication bandwidth limit you want to use:
• Click KBps (kilobytes per second), and type a value in Speed Rate to
set a rate in KBps.
• Click MBps (megabytes per second), and type a value in Speed Rate
to set a rate in MBps.
Click GBps (gigabytes per second), and type a value in Speed Rate to
•
set a rate in GBps.
• Click Default to choose an unlimited replication bandwidth rate.
NOTE:
The minimum allowed replication bandwidth setting that you can
configure is 192 KBps.
5 Click Set Bandwidth (or click Cancel to display the Replication page).
The Successfully set replication bandwidth dialog is displayed when
successful.

Displaying Statistics

To display the statistics for an existing replication relationship:
1 Select StorageReplication.
The Replication page is displayed.
2 Click Select to identify the replication relationship on which you want to
display replication statistics, and click Display Statistics.
The Statistics: Replication page is displayed, which shows three panes of
information:
• The Local Container Name pane lists the local container name,
replication role it plays, the remote container name, and configured
replication bandwidth.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
58
Managing DR4000 Storage Operations