Dell DR4000 Administrator's Manual page 118

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
Table 8-2. DR4000 System Event Messages
System Event Message
Maximum CIFS connection limit
variable
< > reached.
CIFS server failed to start
variable
< >.
CIFS client connected <
times to container <
CIFS server started successfully.
Level = 4
Unable to load deduplication
variable
dictionary <
Unable to locate deduplication
variable
dictionary <
Cleaner process run <
started.
Cleaner process run <
variable
completed in <
milliseconds (ms).
Cleaner process encountered
input/output (I/O) errors.
Failure to sync NVRAM
variable
< >.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
110
Troubleshooting and Maintenance
Description/Meaning or Action
You have exceeded the threshold limit. Reduce
the number of connections.
Reboot the DR4000 system. If issue persists,
contact Dell Support for assistance or
intervention.
variable
> Reboot the DR4000 system. If issue persists,
variable
>. contact Dell Support for assistance or
intervention.
Informational message. No user intervention is
required.
Use the DR4000 system CLI maintenance --
>. configuration
--reinit_dictionary command. If issue persists,
contact Dell Support for assistance or
intervention.
Use the DR4000 system CLI maintenance --
>. configuration
--reinit_dictionary command. If issue persists,
contact Dell Support for assistance or
intervention.
variable
> Informational message. No user intervention is
required.
variable
> Informational message. No user intervention is
> required.
Maintenance-based issue with the DR4000
system. Check status using Maintenance mode
or DR4000 system CLI commands. Contact
Dell Support as needed.
NVRAM hardware issue with the DR4000
system. Check status using Maintenance mode
or DR4000 system CLI commands.