Managing The Dr4000 System Password; Modifying The System Password - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
• Eth3:
– MAC address: 00:30:59:9A:00:99
– Speed (1000Mb/s)
– Max Speed (1000baseT/Full)
– Duplex (Full)

Managing the DR4000 System Password

You can manage the password that you use when logging in to the system in
two ways:
• Modifying the existing login password using Edit Password in the
System Configuration page.
• Resetting the login password to its default value using Reset Password in
the DR4000 System Login page.

Modifying the System Password

To configure a new password or modify an existing password to log in to your
system:
1 In the navigation panel, select System Configuration.
The System Configuration page is displayed.
2 Click Edit Password on the System Configuration page options bar.
The Edit Password dialog is displayed.
3 In Current password, type the current password for the system.
4 In New Password, type the new or modified password that you want to use
for the system.
5 In Confirm password, type the new or modified password again to confirm
this password change for the system.
6 Click Change Password (or click Cancel to display the System
Configuration page).
The Password Change confirmation dialog is displayed when successful.
The next attempt to login requires the use of this new password.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
36
Configuring the DR4000 System Settings