Platform Console - JLG 400S Operation Manual

Platform Console

(See Figure 3-10., Platform Control Console)
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
1. Drive Speed/Torque Select
The forward position gives maximum drive
speed. The back position gives maximum
torque for rough terrain and climbing
grades.
3121670
SECTION 3 - MACHINE CONTROLS AND INDICATORS
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANTS TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
2. Platform Leveling Override
A three position switch allows the operator to
adjust the automatic self leveling system. This
switch is used to adjust platform level in situa-
tions such as ascending/descending a grade.
3. Fuel Select (Dual Fuel Engine Only) (If
Equipped)
Moving the switch to the appropriate position
selects gasoline or liquid propane fuel.
4. Horn
A push-type HORN switch supplies electrical
power to an audible warning device when pressed.
– JLG Lift – 3-15