Error! Style not defined.
Override Mode
The Override Mode bypasses control of the Schedule Table.
This allows the system administrator to immediately put a single port or
group of ports in a specific mode. This override will stay active on the
specified ports until the system administrator reasserts the automatic
schedule. The Override Mode can be activated remotely by the system
administrator. Refer to Manual Mode Selection as well.
The Override Mode has one page which contains all parameters.
The parameters are grouped by category as follows:
Item
Port
Mode
94
This parameter specifies which port(s) are to be set active to a specific
Mode block.
This field is used to pick which Mode block is to be asserted.
Description
© SAMSUNG Electronics Co., Ltd.