Error! Style not defined.
Inserting the Card
The SVMi-20i can be installed in any slot of the OfficeServ 7000 series
cabinet.
The procedure for inserting the card is as follows:
(The following figures show the case of the OfficeServ 7400.)
1.
Check that the OfficeServ 7000 series system's power switch is in the
OFF position.
2.
Align the SVMi-20i to the guide rail in the universal slot of the
OfficeServ 7000 series cabinet, and slide the card into the slot.
46
Before powering off the PSU, it is recommended that you use MMC
740 and set SVM AUTO SETUP to 'No'.
© SAMSUNG Electronics Co., Ltd.