Samsung SVMi-20i User Manual page 179

MWI & AutoFoward
Item
This mailbox
has an MWI
MWI number
Enable auto
forward
Delete after
forwarding
Auto forward
delay (HH:MM)
Pager
notification is
enabled
© SAMSUNG Electronics Co., Ltd.
It notifies that a new message has arrived.
LCD, LED and Tone are used for this end.
It assigns an extension number to notify that a new message has
arrived for this mailbox.
This option turns Auto Forward on.
When set, any messages arriving in this mailbox will be
automatically forwarded to the destination specified on Mailbox
block Call Director page.
If this parameter is set to 'Y', the new message that is to be Auto
Forwarded will be discarded from this mailbox when the
forwarding takes place. If this parameter is set to 'N', the mailbox
will retain a copy of the message that is Auto-Forwarded.
This parameter is only active when 'Enable Auto-Forward'
parameter is set to 'Y'.
The number of hours and/or minutes before a new message is
automatically forwarded to another mailbox. Auto Forwarding is
disabled if this parameter is left blank. The range for this is from 0
(no forward) to 23:59 (almost one day).
A 'Yes' enables the pager notification of new messages received.
An 'No' disables this option.
Description
SVMi-20i User Guide
179