Samsung SVMi-20i User Manual page 81

E-MAIL ADDRESS SYNTAX
An e-mail address can be entered in a couple of ways.
A traditional e-mail syntax is username@mailserverdomain.domainsuffix
(domain suffix can be .com, .net, .org, etc...). In this case, the name entered
as the mailbox label name will be displayed in the Inbox 'From' field if the
voice message was sent from a subscriber to another subscriber.
If you do not want the recipient to see the label name as it is typed, you can
use the following syntax:
Firstname Lastname <username@mailserverdomain.domainsuffix>
or
Departmentname <username@mailserverdomain.domainsuffix>
This applies to all fields that accept an e-mail address:
System Wide Parameters: 'Report' and 'Reply To'

Mailbox block: 'From', 'Deliver MSG', and 'Notify Only'

© SAMSUNG Electronics Co., Ltd.
Report
If the LAN is down, if the SMTP Server is down, or for numerous
other network failures, it may not be possible for the SVMi-20i to
notify the administrator of a failure.
Reply To
Mails sent with this 'Reply To:' address should be blocked by the IT
administrator or sent to a inbox that dumps it's data during
preventative maintenance. Keep in mind that voice messages sent
by public callers cannot be replied to via e-mail. The only purpose for
this parameter is to take care of the requirements dictated by some
mail.
SVMi-20i User Guide
81