Hardware Description - Samsung SVMi-20i User Manual

Error! Style not defined.

Hardware Description

LAN
The component parts of the SVMi-20i are as follows:
SBC (SVMi-20i Motherboard)
SBC (Single Board Computer) is the main circuit card that connects to the
backplane of the phone systems. It connects to the OfficeServ 7200/7400
systems.
LAN Interface
This is used for administration, data transfer, and connecting to IP enabled
phones and trunks. The connector is called the LAN connector. If this is not
connected, administration is not available and MGI card should be used to
connects to IP enabled phones and trunks.
Serial Interface
This can be used to connect PC to provide monitoring the system.
The connector is called the SIO connector.
Reset Button
The sunken button marked RST is the reset button. Pressing this will
immediately restart the SVMi-20i system and will disconnect any calls in
progress.
Since pressing the RST button during operation will disconnect all callers
and immediately restart the SVMi-20i, it should only be used as directed.
Pressing this button when the system is performing disk I/O could result in
data loss or file corruption. This button should not be pressed if the SVMi-20i
is actively processing calls.
42
SIO
PWR RUN IPC LAN
SVC VM MC MEM
RST
SVMi-20i
© SAMSUNG Electronics Co., Ltd.