Samsung SVMi-20i User Manual page 57

Setting up the communications software (Hyper terminal)
To connect from a laptop you may use any communications software that
supports ANSI emulation. The SVMi-20i has been tested using Windows
HyperTerminal.
Launch HyperTerminal from your windows PC and create a new connection.
1.
Name the connection.
2.
Set 'Connect Using' to TCP/IP
3.
Set 'Host Address' to the IP address set in MMC 873.
4.
Set 'Port Number' to '23'.
5.
Click 'Properties' and click 'Settings' tab.
6.
Select 'Terminal' keys.
7.
Set 'Emulation type' to 'ANSI' or 'ANSIW' and click ASCII Set up.
8.
Set 'Line Wrap' to 'No'.
© SAMSUNG Electronics Co., Ltd.
SVMi-20i User Guide
57