Lan Port - Samsung SVMi-20i User Manual

Error! Style not defined.
MONITOR
Turns the Activity monitor on or off for one or all ports.
Syntax: MONIT [port|ALL|OFF]
NET
The net command is used in two ways:
1.
To show the current status of the SVMi network connection at the very
moment you typed NET and hit the [enter] key.
2.
Typing 'net ON' or 'net OFF' will toggle the state of network traffic
reporting as it pertains to the SVMi.
STATUS
Displays port status, available memory and hard drive space.
Syntax: STAT
PORTSTOP
Stops a port and puts it in the idle state.
Syntax: PORTSTOP [port]
UNLOCK
Returns a locked port to the idle state.
Syntax: UNLOCK [port]

LAN Port

The LAN port on the SVMi-20i is used for programming, backup and restore,
e-mail gateway, connecting to IP phones and trunks and uploading and
downloading files to and from the SVMi-20i. This connector is designed to
connect to the customer's internal local area network (LAN) using a straight
through RJ-45 10/100/1000 Base-T cat5 cable.
The LAN port must use a static IP address.
Administration via LAN
Connect the LAN port of the SVMi-20i unit directly to a PC via a RJ-45
10/100/1000 Base-T cat5 direct cable.
56
© SAMSUNG Electronics Co., Ltd.