Samsung SVMi-20i User Manual page 51

Correct System Shutdown
Whenever possible one of the following procedures should be followed when
shutting down the SVMi-20i system and/or prior to shutting down the
Telephone equipment.
Procedure One
1.
From any phone on the system log into KMMC programming.
2.
Using MMC 746 change the status of SVMi-20i from 'PROC' to 'HALT'.
3.
The SVC LED on the front of the SVMi-20i will be turned off.
It means it's safe to power down the switch.
Procedure Two
From the Device Manager:
1.
Select 8.7.4 Shutdown
2.
Enter the System Administrator's password. (Default = 0000)
3.
The SVC LED on the front of the SVMi-20i will be turned off.
It means it's safe to power down the switch.
Procedure Three
1.
From any phone on the system call one of the SVMi-20i ports or call the
station group 5049.
2.
If the SVMi-20i answers with 'enter your password' press [ * ] to escape
to the main menu.
3.
From the main menu press [#][0000].
4.
You will be again prompted to enter a password, enter the System
Administrator's password (Default = 0000).
© SAMSUNG Electronics Co., Ltd.
SVMi-20i User Guide
51