Samsung SVMi-20i User Manual page 169

Item
Number
Extension
Mclass
Language
Send
broadcast
MSG allowed
Extended
prompting
enabled
Directory/
Public
Directory/
User
Mailbox
greeting
allowed
Subscriber
password
© SAMSUNG Electronics Co., Ltd.
The number representing this LIST. It may not be the same as the
number of any other LIST or Mailbox with in a particular subscriber
group.
The name of the extension that belongs to this list.
In many applications, this parameter will be left blank.
This parameter's primary use is to set an extension block that is
used as a Department extension. When unanswered, a caller
leaves a message for the List. The message will then be distributed
to all the members of the List block.
The name of the mailbox class of service that defines operating
characteristics for this List.
This is a language option. You may select from any installed
language and from that point on, the LIST will respond to the
authorized owner in the language selected. Authorized owner
means a user who has entered a valid password.
If the extension parameter is filled in, the SVMi-20i will try to resolve
these fields to a single value (make them match). If conflicting
information is contained in these fields, the extension block has
priority and the LIST block will be automatically changed to match.
This selection is based on the order of the defined languages in
language page of the System Wide Parameters. If the languages
are to be reordered, added to or changed in language page of the
System Wide Parameters, then this field should be re-entered.
Set this parameter to Y if this list is a subscriber administrator.
Otherwise, set to N. If this is set to Yes, then broadcast messages
will be allowed from this list box.
Set this parameter to Y to use the full set of the SVMi-20i menu
prompts. Otherwise, set to N.
A 'Y' in this parameter and the recorded List name allows the listing
in the Public Directory.
A 'Y' in this parameter and the name recorded in the List allows the
listing in the Voice Mail Directory.
When set to 'Y', the caller is allowed to record a greeting for the
LIST block.
Allows the list's password to be changed to the default digits
specified by the default password in the System Wide Parameters
or removed completely. Inputs are 'DEFAULT' or 'NONE'.
Description
SVMi-20i User Guide
(Continued)
169