Samsung SVMi-20i User Manual page 221

Item
Transfer (DO
NOT USE)
Connect (DO
NOT USE)
Reject (DO
NOT USE)
No answer
(DO NOT
USE)
Busy (DO
NOT USE)
Error (DO
NOT USE)
Initiate (DO
NOT USE)
Abort (DO
NOT USE)
Set up (DO
NOT USE)
Tear down
(DO NOT
USE)
© SAMSUNG Electronics Co., Ltd.
The digits to dial to place a caller on consultation hold (when
transferring a caller from one extension to another) and get a dial
tone.
The digits to dial to complete a call transfer and connect the caller
to the called party.
The digits the system dials to abort a call transfer if the called party
rejects the call.
The digits the system dials to abort a call transfer which resulted in
a no answer condition.
The digits the system dials to abort a call transfer which resulted in
a busy signal.
The digits the system dials to abort a call transfer if an error occurs
such as no dial tone.
The dial string used to initiate a conference call.
The dial string used to abort a conference call if the second station
does not answer.
The dial string used to set up a conference call after the second
station answers.
The dial string needed to tear down a conference call and drop the
second station.
Description
SVMi-20i User Guide
(Continued)
221