Samsung SVMi-20i User Manual page 233

Item
Suffix
Simultaneous
xfers
Conference
calls
Internal
station
Monitor
transfer
Max Time of
Waiting for
Answer
Rings for no
answer
Busy cycles
for busy
© SAMSUNG Electronics Co., Ltd.
Enter any DTMF that must be dialed after the actual number.
This will usually be left blank but may include an account code or
PBX feature code. Beepers usually require some form of DTMF
entry after the telephone number.
Set this parameter to 'Y' to allow more than one port to transfer to
the same station simultaneously. This applies to blind transfer
conditions only. This can be applied to cases such as station
groups and operator positions.
Not used.
Not used.
Not used.
This is the maximum time of waiting for answers in seconds.
Number of ringback tones to decide that the callee does not
answer.
Number of busy tones to decide that the callee is busy.
Description
SVMi-20i User Guide
(Continued)
233