Samsung SVMi-20i User Manual page 211

Item
Mclass
Language
Send
broadcast
MSG
allowed
Extended
prompting
enabled
Mailbox
greeting
allowed
Directory
Subscriber
password
© SAMSUNG Electronics Co., Ltd.
The name of the Mailbox Class of Service associated with this NMX.
It should not be a Block used by Standard Mailboxes. If this is a Site
NMX used to control delivery of messages, it may be necessary to
use the ALERT Pointer in the MClass Call Director to specify an
afterhours Mode during which network messages are delivered.
This is a language option. You may select from any installed
language and from that point on, the Network MBX will respond to
the authorized owner in the language selected. Authorized owner
means a user who has entered a valid password.
The Extension block also has a language field. If this Network MBX
has an extension Block assigned to the extension parameter, The
SVMi series will try to resolve the Language fields to a single value
(make them match). If conflicting information is contained in these
fields, the Extension Block has priority and the Network MBX Block
will be automatically changed to match.
This selection is based on the order of the defined languages in
Language page of the System Parameters. If the languages
are to be reordered, added to or changed in Language page of the
System Parameters then this field should be re-entered.
Due to the specialized nature of a Network Mailbox, it is not used.
A 'Yes' in this field enables the full length, extended prompting to
play to the subscriber the next time he logs into his Mailbox.
Once the flag is set to 'No', extended prompting does not play again.
The extended prompting is used to aid the new mailbox user.
When set to yes the caller is allowed to record a mailbox greeting.
A 'Yes' in this field allows this NMX to be listed in the Public
Directory. Unless outside callers are to be allowed to send network
messages to remote subscribers, this field should be set to 'No'.
A 'Yes' in the 'User' field allows this NMX to be listed in the User
Directory. The mailbox may be listed by subscriber name, if a name
is recorded, or by mailbox number.
Allows the mailbox password to be changed to the default digits
specified by Default Password in the System Parameters or
removed completely. Inputs are: 'DEFAULT' or 'NONE'.
Description
SVMi-20i User Guide
(Continued)
211