Samsung SVMi-20i User Manual page 130

Error! Style not defined.
Faxback Delivery
Item
Local Area
Code
On premise
Y/N
On premise
station name
Local call area
Y/N
Local call area
station name
130
The local area code must be entered in this field so SVMi-20i can
determine when to include an area code for dialing fax call back
telephone numbers.
Select Yes/No to allow/restrict fax delivery
The Station type to use for on premise fax back deliveries.
Set to 'Yes' to allow call back delivery to telephone numbers in the
local area code.
The Station type to use for off premise fax back deliveries.
Select a new or existing station Block. The Prefix field in the
corresponding Station Block should include any digits required for
SVMi-20i to obtain dial tone from the local CO (e.g. '9' to access a
trunk on the PBX). The Prefix may include up to eight digits.
Valid dialing characters are 1234567890*#abcd&;,WKX.
In most areas a Suffix is not required for local area delivery.
If it is, the valid dialing characters are the same as for the Prefix
field. SVMi-20i executes a call back by first dialing the Prefix,
followed immediately by the telephone number entered by the call
requesting the delivery, and finally out-dials the Suffix, all as one
continuous digit string.
Description
© SAMSUNG Electronics Co., Ltd.