Removing A 3.5 Inch Drive Adapter From A 3.5 Inch Drive Carrier - Dell EMC PowerEdge T440 Installation And Service Manual

Figure 35. Installing a 2.5 inch drive into a 3.5 inch drive adapter

Removing a 3.5 inch drive adapter from a 3.5 inch drive carrier

Prerequisites
1 Follow the safety guidelines listed in
2 If installed, remove the front bezel.
3 Remove the 3.5 inch drive carrier from the system.
Steps
1 Using the Phillips #1 screwdriver, remove the screws from the rails on the drive carrier.
2 Lift the 3.5 inch drive adapter out of the 3.5 inch drive carrier.
86 Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
Safety instructions.