Dell EMC PowerEdge T440 Installation And Service Manual page 139

Figure 87. Installing the information tag
Figure 88. Installing the control panel assembly
2 To install the information tag, push the information tag into the control-panel slot.
3 Connect the control panel cable and the control panel USB cable to the control panel assembly.
4 Align and insert the control panel into the control panel slot in the chassis.
5 Secure the control panel to the chassis by using the screw.
6 Connect the control panel cable and the control panel USB cable to the system board.
Next step
1 Follow the procedure listed in After working inside your system.
Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
139