Removing A Cabled Drive - Dell EMC PowerEdge T440 Installation And Service Manual

Figure 43. Installing the internal hard drive bay
Next steps
1 Follow the procedure listed in
2 Connect the data and power cables to the hard drive(s).

Removing a cabled drive

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the internal drive bay.
Steps
1 Remove the four screws securing the drive to the internal drive bay.
2 Remove the hard drive from the internal drive bay.
94 Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
After working inside your system.
Safety instructions.
Before working inside your system.