Drive Specifications; Drives; Optical Drive; Ports And Connectors Specifications - Dell EMC PowerEdge T440 Installation And Service Manual

Drive specifications

Drives

The PowerEdge T440 system supports:
• Up to 4 x 3.5 inch cabled drives with drive adapter, internal, SATA, or Nearline SAS drives
or
• Up to 8 x 3.5 inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives
or
• Up to 16 x 2.5 inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives

Optical drive

The T440 system supports one optional slim SATA DVD-ROM drive or DVD +/-RW drive.

Ports and connectors specifications

USB ports

The table provides information about the supported USB port specifications.
Table 17. USB specifications
System
PowerEdge T440

NIC ports

The PowerEdge T440 system supports two Network Interface Controller (NIC) ports on the back panel each with 1 Gbps configuration.
NOTE: You can install up to six PCIe add-on NIC cards.

VGA ports

The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The T440 system supports one 15-pin VGA ports
on the back of the system.

Serial connector

The T440 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-
compliant.
Front panel
• One USB 2.0-compliant port
• One USB 3.0-compliant port
Back panel
• Four USB 2.0-compliant rear ports
• Two USB 3.0-compliant rear ports
Dell EMC PowerEdge T440 Installation and Service Manual
Technical specifications
35