Installing The Internal Hard Drive Bay - Dell EMC PowerEdge T440 Installation And Service Manual

Figure 42. Removing the internal hard drive bay
Next step
Follow the procedure listed in

Installing the internal hard drive bay

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Keep the Phillips #2 screwdriver ready.
Steps
1 Align the internal hard-drive bay with the tabs on the chassis and slide the internal hard drive bay into the chassis.
2 Secure the internal hard drive bay to the chassis using the two captive screws.
After working inside your system.
Safety instructions.
Before working inside your system.
Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
93