Optional Front Bezel; Removing The Front Bezel; Installing The Front Bezel - Dell EMC PowerEdge T440 Installation And Service Manual

Optional front bezel

The front bezel is attached to the front of the system to prevent unauthorized access to the system peripherals. The front bezel can be
locked for additional security.

Removing the front bezel

1 Unlock the bezel by using the bezel key.
NOTE: There are two bezel keys attached to the back of the bezel.
2 Press the release latch at the top of the bezel.
3 Pull the top end of the bezel away from the system.
4 Unhook the bezel tabs from the slots at the bottom of the system, and pull the bezel away from the system.
Figure 18. Removing the front bezel

Installing the front bezel

Prerequisite
Follow the safety guidelines listed in
Steps
1 Locate and remove the bezel key.
NOTE: There are two bezel keys attached to the back of the bezel.
2 Insert the bezel tabs into the slots in the chassis.
3 Press the release latch, and push the bezel toward the system until the bezel locks into place.
4 Using the key lock the bezel.
Safety instructions.
Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
69