Processors And Heat Sinks - Dell EMC PowerEdge T440 Installation And Service Manual

Steps
1 Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash, see the System board jumpers and connectors section.
2 Align IDSDM/vFlash card with the connector on the system board.
3 Push IDSDM/vFlash card until it is firmly seated on the system board.
Figure 68. Installing optional IDSDM/vFlash card
Next steps
1 Install the MicroSD cards.
NOTE: Reinstall the MicroSD cards into the same slots based on the labels you had marked on the cards during
removal.
2 Follow the procedure listed in
Related link
System board jumpers and connectors
Installing the MicroSD card

Processors and heat sinks

The processor controls memory, peripheral interfaces, and other components of the system. The system can have more than one
processor configurations.
The heat sink absorbs the heat generated by the processor, and helps the processor to maintain its optimal temperature level.
After working inside your system.
Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
121