Installing The Processor Into A Processor And Heat Sink Module - Dell EMC PowerEdge T440 Installation And Service Manual

Figure 71. Removing the processor bracket
Next step
Install the processor into the processor and heat sink module.
Related link
Removing the air shroud
Removing a processor and heat sink module

Installing the processor into a processor and heat sink module

Installing the processor into a processor and heat sink module
Prerequisite
Follow the safety guidelines listed in
Steps
1 Place the processor in the processor tray.
NOTE: Ensure that the pin 1 indicator on the processor tray is aligned with the pin 1 indicator on the processor.
2 Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on the bracket.
NOTE: Ensure that the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing
the bracket on the processor.
NOTE: Ensure that the processor and the bracket are placed in the tray before you install the heat sink.
Safety instructions.
Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
125