Battery Charger - CORRECT CRAFT super air 230 2018 Owner's Manual

Section 3
Taps 2 Option Installation Instructions
Please read and understand instructions before attempting to use
cover.
1. Loosen rope at rear rope cleat.
2. Hook webbing loop around tower pylon.
3. Install cover, tightening ratchets about half way.
4. Pull rope tight and lock into rope cleat.
5. Finish tightening ratchets.
6. To uninstall, fully loosen rope by pulling up sharply. Then
release ratchets.
Suggested use of poles include:
• High speed trailering, greater than 70 mph
• Seasonal storage

Battery Charger

Nautique offers battery charging systems for single- and dual-
battery applications. The exact battery charger model required for
your boat will depend on the number of batteries your boat is
equipped with and the specific electrical requirements from the
country in which your boat will be operating. Because of the wide
variance in electrical plug configurations used in each country, all
boats built for use outside the United States will require your
Nautique dealer to install the proper electrical plug on the battery
charger AC supply cord. Your Skippers Kit will contain a manual
from the battery charger manufacturer that explains the proper
wiring requirements for each system as well as instructions for safe
operation of the charger.
3-44