Mooring Cover Instructions - CORRECT CRAFT super air 230 2018 Owner's Manual

Section 3

Mooring Cover Instructions

cover, please read and understand instructions before
attempting to use cover.
Features:
1. A special anti-pooling system is included to prevent large
puddles from ruining your cover.
2. The SurLast
water repellency and breathability.
3. The Vacu-Hold™ system allows trailering at highway speeds (65
mph) without billowing or buffeting.
4. The ratchet and drawstrap type attachment will allow easy, tight
and secure installation.
Care Instructions
Wash with warm soapy water (while installed if possible) and allow
to air dry. For stubborn stains, mild detergent is recommended.
Over time dirt and grime can build up on the cover and may dirty
your vinyl. We suggest using a product such as Mr. Clean Magic
Eraser to aid in removing this type of staining. Storing the boat in
constant direct sunlight will shorten the life of the cover and the
components used to construct it. We recommend storing the boat
in a location that exposes it to some sun and also shades it
throughout the day, preferably morning sun and afternoon shade.
Refer to www.commercialsewing.com/careanduse for more
information.
NOTE: As a preventative measure, we recommend
periodically applying a no-seize type lubricant in the barrel of
the ratchet, as indicated in the following image.
3-38
To prevent damage to your boat and/or
all-weather fabric was chosen to allow stability,
®