Ballast Filtration System (Optional) - CORRECT CRAFT super air 230 2018 Owner's Manual

Ballast Filtration System
(optional)
Some local lake authorities require the ballast system to be de-
contaminated before launch. Nautique offers Aquatic Invasive
Species filters integrated directly into the ballast fill hoses that may
allow you to speed up your inspection. The filters are sealed and
date tagged at the time of manufacture and function automatically
when the ballast pump is turned on.
Ballast filtration elements must be replaced by an authorized
dealer only.
Ballast filtration
should be changed at least
every 6 months
authorized dealer. Depending
on the water quality where
your boat operates, ballast
filtration elements may need to
be changed more frequently. If
you experience longer than
normal ballast fill times, it is
likely time to replace the
ballast filtration elements. This
should be performed only by
an authorized dealer so that
the filter units are re-sealed
with genuine Mussel Mast'R™
"Tamper Evident Seals" and "Date Tags" are re-applied. This must
be done in order to be recognized and accepted at invasive species
inspection stations. See your Nautique dealer as needed for
replacement of filter cartridges.
Care and Maintenance
elements
by an
CORC0647
7-5