Checking V-Drive Unit Fluid - CORRECT CRAFT super air 230 2018 Owner's Manual

Section 7

Checking V-Drive Unit Fluid

can cause serious injury. Do not remove the V-Drive unit
drain/fill plug while the engine is running or while the
V-Drive unit is hot.
Allow the V-Drive unit to cool and check with the boat level.
1. Remove the drain/fill plug from the V-Drive unit.
2. Verify the fluid level; the fluid level should be at the bottom of
the threaded hole. If low, add the specified fluid through the
threaded hole to the proper level.
The V-Drive unit fluid is a very high viscosity. To make adding
fluid easier, remove both fill plugs.
3. Replace the drain/fill plug and tighten securely.
Oil Fill/Drain
7-20
Burn hazard from hot V-Drive unit fluid
Plug
Raw Water
Drain Plug
Oil Fill/Drain
Plug
CORC210