Battery Circuit Panels - CORRECT CRAFT super air 230 2018 Owner's Manual

Section 3
To lock the system, re-enter any of the three codes and press STOP.
Erasing the User Codes
Make sure the system indicator light is OFF.
Enter the Master Embedded Code, press and release the 1/2 key
and the 7/8 key at the same time to erase the system user codes.
The keyless ignition will now act as if there are no codes in memory.
Pressing the START key will unlock the system and pressing the
STOP key will lock it without entering a code. Follow the steps in
"Programming the Primary User Code" in this section.

Battery Circuit Panels

Your Nautique is equipped with battery circuit panels to manage
the electrical system. Refer to the following illustrations to identify
the circuit panel installed in your boat.
3-16