Power Switch; Control Panel - Dascom DT-210 User Manual

Tally Dascom DT-210/230

1.4.1 Power Switch

Turn the printer on or off. The marks on the switch: (O: OFF / | : ON)
Before turning on the printer, be sure to check that the AC adapter is connected to
the power supply.

1.4.2 Control Panel

LEDs
Power LED (green)
•
Lights when the power supply is on.
•
Goes out when the power supply is turned off.
Error LED
Lights or flashes when the printer is offline.
•
Lights after the power is turned on or after a reset (offline). Automatically goes out after a while
to indicate that the printer is ready.
•
Lights when the end of the roll paper is detected, and when printing has stopped (offline). If this
happens, replace the roll paper.
•
Flashes when an error occurs. (For details about the flash code, see
•
Goes out during regular operation (online).
Paper LED
•
Lights when there is no more roll paper or there is little remaining.
•
Off when there is a sufficient amount of roll paper remaining.
•
Flashed when a self-test is in progress.
Power LED
Error LED
Paper LED
Feed key
6
User Guide V1.3
"Error Status" on page 52.)