Selecting The Print Density; Auto Cutter Enable/Disable Selection - Dascom DT-210 User Manual

Tally Dascom DT-210/230

5.4 Selecting the Print Density

2-5
ON ON
OFF OFF
ON OFF
OFF ON
•
If the print density is set to 3 or 4 level, printing speed may be reduced.
•
The print density can be set with DIP switches or the customized value.

5.5 Auto Cutter Enable/Disable Selection

SW 2-3
Application
2-6 2-7
Reserved
Reserved
Reserved
Reserved
Dip Switch Set 2
ON
OFF
Ignores Auto Cutter error for continuous printing.
Print Density (Mono color)
1 (Light)
2 (Standard)
3 (Darker than standard)
4 (Dark)
Auto Cutter Disabled
Auto Cutter Enabled
51
User Guide V1.3
Default
2