Table of Contents
Advertisement
Tally Dascom DT-210/230
have surge protection.
Otherwise, the devices can be damaged by lightning.
•
Never attempt to connect the customer display cable, drawer kick-out cable,
or the standard telephone line cable to the 10/100BASE-T LAN connector.
1.
Switch on printer, press and hold the Reset key for more than 3 seconds with the tip of pen or
small tool. Then the printer will print out a status sheet as shown below.
The following are printed on the status sheet.
•TCP/IP settings.
• Other Information.
Make sure your PC IP address and printer IP address are in the same section.
27
User Guide V1.3
Advertisement
Table of Contents
Need help?
Do you have a question about the DT-210 and is the answer not in the manual?
Questions and answers