Table of Contents
Advertisement
Tally Dascom DT-210/230
3.6.3 Wlan Setup - STA mode
In the Wi-Fi parameter, if there is IP Address, it suggests they are connected successfully by STA
mode. Otherwise, they are not connected. Like showed in the picture below, they are connected
successfully.
1. Visit http://192.168.0.33
log in. You will see the following Wi-Fi setup page. Click "Submit" button after modifying the
parameter. Restart printer, new parameter will be valid.
2. Log into work mode option, then choose STA mode. Click "Save" button after modifying the
parameter. Restart printer, new parameter will be valid.
Log onto STA setting, Click "Save" button after modifying the parameter such as SSID, and
3.
encryption mode. Restart printer, new parameter will be valid.
. Default username is admin with password admin for the first time to
37
User Guide V1.3
Advertisement
Table of Contents
Need help?
Do you have a question about the DT-210 and is the answer not in the manual?
Questions and answers