Table of Contents
Advertisement
Tally Dascom DT-210/230
User Guide V1.3
2.7 Installing Optional Kits
Interface Cover
Adjust the relative positions between interface cover and printer as shown below, and push the
interface cover as arrow shows below.
Splash Cover (optional kit)
Slip the fixed hooks on both sides of splash cover into the mounting hole on the printer, and close the
splash cover.
Mounting Plate (optional kit)
1. Mount the plate on the lower housing of the printer with screws.
2. Align the positioning holes of the hanging plate and plug into the fixed screws on the wall.
15
Advertisement
Table of Contents
Need help?
Do you have a question about the DT-210 and is the answer not in the manual?
Questions and answers