Printer Start-Up; Loading Filament - Flashforge Invertor II User Manual

4.2 Printer Start-up

Power switch
(4-3) Insert the power supply into the power input on the back of the InventorⅡ and
plug the power cord into an electrical outlet.

4.3 Loading Filament

For stable filament loading and proper device protection, you need to install the
filament guide tube properly.
(4-5) Take out the filament guide tube, thread the filament from the filament
cartridge through the tube.
InventorⅡ User Guide | www.flashforge.com
4-4
4-5
25
Power Input
400-699-1063