Flashforge Invertor II User Manual page 15

The picture displays the preheat interface. It
shows the actual temperature and the target
temperature. Tap the [Cancel] button to
abort the preheat job.
Tools
Tap [Tools] to enter tool options.
 Filament: To load/unload the filament.
 Level: To adjust the build plate.
 Home: To make the X, Y and Z axes
back to the zero point.
 Manual: To manually adjust the positions
of X, Y and Z axes.
 Setting: To implement relevant function
setups.
 Status: The check the real-time status of
the printer.
 About: Information about the printer.
 Back
Manual adjustment
 Y+: The extruder moves to the zero
point, that is, the back of the machine
 Y-: The extruder moves to the direction
opposite to the Y+.
 X+: The extruder moves to the zero
points, that is, to the right direction
 X-: The extruder moves to the direction
opposite to the X+.
 Z+: The build plate elevates.
 Z-: The build plate descends.
 Back
15
InventorⅡ User Guide | www.flashforge.com 400-699-1063