Flashforge Invertor II User Manual page 38

Method 3: Hold down the
● Rotate
Click the [View] icon
methods:
Method 1. Hold down the right mouse button and drag.
Method 2. Hold down the
● Scale
Rotate the mouse wheel to enlarge or shrink the build plate.
②Set View
Allow users to view the object on the build plate. There are six views are under the
view menu, that is, home view, bottom view, top view, front view, back view, left view
and right view.
Method 1: Click the the
Method 2: Click the the
will appear with six views for selecting.
③Reset View
Allow users to reset views by the following two methods:
Method 1: Click the
Method 2: Click the
viewing options, you can click [Reset].
④Show Model Outline
[View]--[Show Model
Click
InventorⅡ User Guide | www.flashforge.com
Shift key, hold down the right mouse button and drag.
and then you can rotate the object by the following two
Shift
key, hold down the left mouse button and drag.
[View] button, there are six views in the drop- down list
[Look]
icon
[View] menu and select
[View] button on the left, click it again and you will see the
Outline], it will highlight the yellow border of the object
on the left, click it again and a submenu
[Home View]
38
400-699-1063