Flashforge Invertor II User Manual page 23

condition.
.
3-8
(3-8) Slightly squeeze the bottom of the lid, and remove it carefully.
(3-9) Take out the left foam, left the build plate up and take out the protective foam.
3-9
(3-9) Take out left side foam sheet. Elevate the build plate up and then take the bottom
foam sheet out.
Congratulations! You have unpacked your InventorⅡ. Next, let's move on to
hardware assembly of InventorⅡ.
23
InventorⅡ User Guide | www.flashforge.com 400-699-1063