Flashforge Invertor II User Manual page 17

WLan hotspot
 OFF/On: To turn on/off the Wlan
hotspot.
Setup Wlan hotspot: To set the SSID and
password.
SSID: The name of hotspot.
Password: The password of hotspot.
Save: To save the setting.
Back
Extruder Adjust:
After the build plate and extruder
finish the initial movement, you can
tap '+'or '-' to adjust the distance
between the build plate and nozzle.
Z：0. 00 stands for the position where
the servo is precisely triggered.
Status:
It displays the real-time status of the
extruder temperature, fan and filament.
17
InventorⅡ User Guide | www.flashforge.com 400-699-1063