Printer Start-Up; Loading Filament - Flashforge Guider II User Manual

4.2 Pr inter Star t-up
(4-3)Insert the power supply into the power input on the back of the GuiderⅡ and
plug the power cord into an electrical outlet.

4.3 Loading Filament

For stable filament loading and proper device protection, you need to install the
filament guide tube properly.
(4-4) Take out the filament guide tube, thread the filament from Filament
Detecting Equipment
GuiderⅡ User Guide | www.flashforge.com
4-3
4-4
27