Flashforge Invertor II User Manual page 26

(4-6) Insert the filament from the filament guide tube into the filament intake.
Next, we will load the FlashForge
increase the distance between the nozzle and build plate to 50mm at least for
avoiding nozzle jam.)
(4-7) Tap [Tool].
(4-8) Tap [Filament]--[Load]
InventorⅡ User Guide | www.flashforge.com
4-6
filament.(Note: Please lower the build plate to
4-7
图 4-6
4-8
26
400-699-1063