Flashforge Invertor II User Manual page 16

Tap [Setting] to enter the setting
interface
 Language: To set the display language
 WiFi: To turn on/off the WiFi
 WLan hotspot: To turn on/off the
WLan hotspot.
 Extruder Calibration: To adjust the
initial distance between the extruder and
the build plate.
 Filament Check: To turn on/off the
filament check
 Door Opened Pause: To turn on/off
the function of door pause
 Factory Reset ： Return to factory
setting
 Update: To update the firmware
version.
Back
WiFi:
 Turn on WiFi: Turn on the WiFi,
release the WiFi hotspot and set the WiFi
on computer
Back
16
InventorⅡ User Guide | www.flashforge.com 400-699-1063