Oce Colorado 1640 Operation Manual page 155

4. Tap on [IPv4] to change the TCPIP v4 parameters.
5. Tap on [IPv6] to change the TCPIP v6 parameters.
6. Tap on Save to save the settings.
7. Tap on the [Back] arrow.
8. Tap on [Remote services]. One of the settings you can change are the [Proxy settings].
NOTE
• A proxy may be required to access the internet and make use of Remote services.
Ask your IT administrator for the settings, if he does not know them use the default
values.
• To change the Remote connection settings ask your local Service representative.
9. Click on Save to save the settings.
Chapter 7 - Configure the network and security settings
Configure the network
155