Replace The Knife - Oce Colorado 1640 Operation Manual

Replace the knife

Replace the knife
Introduction
Replace the knife when the knife does not cut your media correctly anymore.
Before you begin
Use Océ Colorado 1640 prescribed:
• Screwdriver (Torx-20) for the cover
• Screwdriver (Torx-6) for the knife
• Knife
NOTE
For information on the prescribed maintenance materials, see
maintenance materials on page
Procedure
1. Open the top cover from the media input side.
2. Locate the knife and move it from the left to the right.
3. Go to the media output side and locate the knife compartment cover on the left.
120 Chapter 5 - Maintain the system
134.
List of Océ Colorado 1640