Solve Smudges - Oce Colorado 1640 Operation Manual

Solve smudges

Introduction
Solve smudges on your print. Smudging of ink occurs because the top layer is not fully cured.
Follow the procedure below. You can stop at any time in the procedure when the problem is
solved.
Smudging
Procedure
1. Try a different media type.
2. Increase the [Precure] or [Postcure] settings in the RIP.
CAUTION
Only experienced users or color experts can change these settings. When you are not
sure, contact your local Service representative.
3. Tune the [Printer platen temperature] in the RIP.
After you finish
When the problem is not solved, contact your local Service representative.
Change the media settings on page
Change the media settings on page
Chapter 6 - Improve quality
Solve smudges
44.
44.
151