Table of Contents
Advertisement
Clean the matrix plate
5. Open the media cover (1) and lift the lever of the manual maintenance door on the left (2).
3
6. Open the manual maintenance door (3). A light is switched on.
IMPORTANT
Do not use any external light source to prevent curing of the ink and damage to the
printheads.
7. Locate the matrix plate in the compartment.
8. Place the matrix plate cleaning tool against the matrix plate and position it correctly, as
illustrated.
9. Press the cleaning tool against the matrix plate.
1. Make sure all sides of the tool press against the matrix plate.
2. Hold the cleaning tool in place for at least 30 seconds.
IMPORTANT
Press until you lift the printhead carriage up very lightly. When you press too hard you
will damage the printheads and carriage.
104
Chapter 5 - Maintain the system
2
1
Advertisement
Table of Contents
Troubleshooting
